User's Manual

User’s Manual
http://www.exoatletasia.com
ExoAtlet
Ⓡ
II 46 / 84 Ver 1.0 (2019.03.29.)
1) Pilots
Choose the pilot to train with by pressing on his name. Currently only default pilot
is available.
Figure 47
2) Parameters of training
Enter current values of pulse, blood pressure, saturation by pressing the buttons
with arrow in the right side from the value. Then press “OK”. You will get to the
training screen.
Warning: please pay attention that device does not measure these values by itself.
User should measure them using appropriate equipment and then type them.
Warning: there is a range of the values that you can enter. If one of the vital values
of the patient exceeds the range, it is a contraindication.
Figure 48