User's Manual

Wireless network setup

127

2. Using a network-connected machine

Select Using a direct wireless connection on the Select the Wireless

Setup Method screen click Next.

If the screen does not appear, go to step 7.

When the wireless network set up is completed, Click Next.

Select software to be installed.

After selecting the components, you can also change the printer driver

name, set the machine to be shared on the network, set the machine as

the default machine. Click Next.

When the installation is complete, click Finish.

Ad hoc via USB cable

If you do not have an access point (AP), you may still connect the machine

wirelessly to your computer by setting up an ad-hoc wireless network by

following the simple steps below.

Items to prepare

• Network-connected computer

• Software CD that was provided with your machine

• A machine installed with a wireless network interface

• USB cable

Creating the ad hoc network in Windows

Turn on your computer and the wireless network machine.

Insert the supplied software CD into your CD-ROM drive.