User's Manual

Wireless network setup
136
2. Using a network-connected machine
If your computer is set to DHCP and you want to use the Static wireless
network setting, you must contact the network administrator to get the
static IP address.
For the DHCP method
If the IP address assignment method is DHCP, check if DHCP is shown in
the Wireless Network Setting Confirm window. If it shows Static, click
Change TCP/IP to change the assignment method to Receive IP
address automatically (DHCP).
For the Static method
If the IP address assignment method is Static, check if Static is shown in
the Wireless Network Setting Confirm window. If it shows DHCP, click
Change TCP/IP to enter the IP address and other network configuration
values for the machine.
For example,
If the computer’s network information is as shown follows:
- IP address: 169.254.133.42
- Subnet Mask: 255.255.0.0
Then, the machine’s network information should be as below:
- IP address: 169.254.133.43
- Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)
- Gateway: 169.254.133.1
14
The Wireless Network Setting Complete window appears. Click Next.
15
When the wireless network settings are completed, disconnect the USB
cable between the computer and machine. Click Next.
16
After the installation is finished, click Close.
17
Using a network cable
Machines that do not support the network interface will not be able to use
this feature (see "Rear view" on page 16).
Your machine is a network compatible machine. To enable your machine to
work with your network, you will need to perform some configuration
procedures.
After completing the wireless network connection, you need to install a
machine driver to print from an application (see "Installing driver over
the network" on page 106).
See your network administrator, or the person that set up your wireless
network, for information about your network configuration.
Items to prepare
Access point
Network-connected computer
Software CD that was provided with your machine
A machine installed with a wireless network interface
Network cable