User's Manual

Wireless network setup

166

2. Using a Network-Connected Machine

Select Using a direct wireless connection on the Select the Wireless

Setup Method screen. Then, click Next.

Even if your computer is running Windows 7 or higher, you cannot use

this feature if your PC does not support wirless network. Set the wireless

network using a USB cable (see "Access point via USB cable" on page

161).

If below screen apperas, press the (WPS) button from the control panel

withing 2 minutes.

When the wireless network set up is completed, click Next.

Select the components to be installed.

After selecting the components, you can also change the printer driver

name, set the machine to be shared on the network, set the machine as

the default machine. Click Next.

Click Finish.