User's Manual

Basic faxing

2. Menu Overview and Basic Setup

The resolution setting is applied to the current fax job. To change the

default setting (see Advanced Guide).

Select (fax) > (Menu) > Fax Feature > Resolution on the

control panel.

Select the option you want and press OK.

• Standard: Originals with normal sized characters.

• Fine: Originals containing small characters or thin lines or originals

printed using a dot-matrix printer.

• Super Fine: Originals containing extremely fine detail. Super Fine

mode is enabled only if the machine with which you are

communicating also supports the Super Fine resolution.

• For memory transmission, Super Fine mode is not available. The

resolution setting is automatically changed to Fine.

• When your machine is set to Super Fine resolution and the fax machine

with which you are communicating does not support Super Fine

resolution, the machine transmits using the highest resolution mode

supported by the other fax machine.

Press (Stop/Clear) button to return to ready mode.

Darkness

You can select the degree of darkness of the original document.

The darkness setting is applied to the current fax job. To change the default

setting (see "Fax" on page 217).

Select (fax) > (Menu) > Fax Feature > Darkness on the

control panel.

Select a darkness level you want.

Press (Stop/Clear) button to return to ready mode.