User's Manual

DRAFT
FOR INTERNAL USE ONLY
111
Settings
Main Menu
4. Use the Directional key to highlight the target
device and press PAIR. Follow the prompts:
•
Auto Pairing: If you enabled Auto Pairing in
Bluetooth Options, and the selected device
supports it, your phone sends a default device
code to the device. At the prompt, confirm the
device code to complete pairing.
•
Pairing with Passkey: Enter a passkey, then
press SET. Follow the prompts on the target
device to enter the same passkey and complete
the pairing.
5. At the prompt, set incoming security for future
pairings:
•
Always Ask: Your phone will prompt you to
accept future pairings from this device.
•
Always Connect: Your phone will automatically
accept future pairing requests from this device.
6. Use the Directional Key to highlight the new device,
then press the
Right Soft key (Options) to set
options for this paired device:
•
Remove Device: Remove this device from your
phone’s pairing list.
•
Rename Device: Change the name of this
device in the pairing list.
•
Incoming Security: Choose Always Ask or
Always Connect for future pairings with this
device.
•
Service Discovery: View the service profiles
supported for pairing with this device.
•
Device Info: View information about the paired
device.