User's Manual
Table Of Contents
- SM-B690V Product Safety & Warranty Information
- Section 1: Health and Safety Information
- Exposure to Radio Frequency (RF) Signals
- Specific Absorption Rate (SAR) Certification Information
- FCC Part 15 Information to User
- Commercial Mobile Alerting System (CMAS)
- Samsung Mobile Products and Recycling
- Smart Practices While Driving
- Battery Use and Safety
- UL Certified Travel Charger
- Display / Touch-Screen
- GPS & AGPS
- Emergency Calls
- Care and Maintenance
- Responsible Listening
- Operating Environment
- FCC Hearing Aid Compatibility (HAC) Regulations for Wireless Devices
- Restricting Children's Access to Your Mobile Device
- FCC Notice and Cautions
- Other Important Safety Information
- Section 2: Warranty Information
- Index
- Section 1: Health and Safety Information
DRAFT
FOR INTERNAL USE ONLY
118
Settings
Main Menu
Driving Mode
Driving Mode overrides the Master Volume level and
converts all visual notifications to sounds. When
Driving Mode is On, Master Volume is set to High, and
Call Alert sounds will play regardless of the sound
setting. You can choose to have Caller ID read out for
incoming calls or messages, or choose to have Caller
ID and message contents read out.
1. From the Home screen, press
MENU >
Settings > Sounds Settings > Driving Mode.
2. Choose a setting:
•
Caller ID Only: Reads out Caller ID for incoming
calls and messages.
•
ID & Message: Reads out Caller ID and the
message content for incoming messages.
•
Off: Driving Mode is not enabled.
Display Settings
Configure settings for your phone’s screen.
Easy Set-Up
Use Easy Set-up to quickly set the display settings for
your phone.
1. From the Home screen, press
MENU >
Settings > Display Settings > Easy Set-up.
2. Use the Directional keys, Left Soft
key, Right Soft key, and CenterSelect
key to follow the prompts to configure
PersonalBanner, Display Backlight, Keypad
Backlight, MainWallpaper, Front Wallpaper,
DisplayThemes, Menu Layout, Dial Fonts,
Volume Key Control, Main Clock, and
FrontClock.