User's Manual

85
• Camcorder:
– Movie size : Select a resolution for videos. Use higher resolution
for higher quality. Higher resolution videos take up more
memory.
– Multi motion : Use this for slow motion videos. You can set
Multi motion to 1/8, 1/4, 1/2, or 1 (normal speed motion).
– Sound : Use this to decrease zoom noise when recording
videos. You can set Sound to Quiet zoom turned on/off or Mute.
– Windcut : Use this to remove some background noise and wind
noise.
•Share:
– Share shot : Use this to send a photo/video directly to another
device using Wi-Fi Direct.
– Buddy photo share : Uses face recognition from pictures in
your contact entries to send your friends or family pictures of
themselves.
– ChatON photo share : Send a photo directly to another device
via ChatON.
– Remote viewfinder : Set a device to control the camera
remotely.
• Settings:
– Camera function volume : Adjust the auto focus sound.
– Beep : Activate or deactivate beep sounds.
– Description : Display mode descriptions.
– Guidelines : Display a guide to help you compose a scene.
– Auto screen off : Set the length of time the device waits before
turning off the display’s backlight.
– Review : Briefly display photos or videos taken.
– Signature :
– Date/time Imprint : Use this to imprint the date and/or the time
on the photos when taking them.
– Auto adjust display : Set the camera to automatically adjust
the brightness of the display.
– GPS tag : attach a GPS location tag to the photo. To improve
GPS signals, avoid shooting in locations where the signal
may be obstructed, such as between buildings or in low-
lying areas, or in poor weather conditions. Your location may
appear on your photos when you upload them to the
Internet. To avoid this, deactivate the GPS tag setting.
Note: When you select a value other than 1,
sound is not recorded.
DRAFT
FOR INTERNAL USE ONLY