User's Manual

167
Manually add your new network connection
1. From the Home screen, tap ➔ Settings ➔
Connections ➔ Wi-Fi .
2. Tap
Add Wi-Fi network .
3. Enter the
Network SSID . This is the name of your
Wireless Access Point.
4. Tap the
Security field and select a security option. This
must match the current security setting on your target
WAP.
5. If secured, you will also need to enter your WAP’s
password.
6. Tap
Show advanced options , if you need to add
advanced options such as Proxy settings, IP settings,
or Key management.
7. Tap
Connect to store the new information and connect
to your target WAP.
Note: The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the WAP key again, unless you reset
your device back to its factory default settings.
Turning Wi-Fi Off
1. From the Home screen, tap ➔ Settings ➔
Connections ➔ Wi-Fi .
2. Tap the ON/OFF slider, located to the right of the Wi-Fi
field, to turn Wi-Fi OFF .
Note: Use of wireless data connections such as Wi-Fi and
Bluetooth can cause an added drain to your battery and
reduce your use times.
Manually Scan for a Wi-Fi Network
1. From the Home screen, tap ➔ Settings ➔
Connections ➔ Wi-Fi .
2. Tap
Scan .
All available Wi-Fi networks are displayed.
DRAFT
FOR INTERNAL USE ONLY