User's Manual

185
– Alarm tone : sets the sound file which is played when the
alarm is activated. Select an option or tap Add for additional
options.
– Alarm volume : drag the slider to adjust the alarm’s volume.
– Location alarm : when activated, the alarm only sounds
when you are at a specific location. Touch and slide the
slider to the right to turn it on then follow the on-
screen instructions to enter a location.
– Snooze : use this option to set a Duration (3, 5, 10, 15, or 30
Minutes) and Snooze repeat (1, 2, 3, 5, or 10 Times). Tap
the ON/OFF slider to activate.
– Smart alarm : tracks body movements and calculates the
best time for sounding the alarm. Place the phone
somewhere on your bed then the phone's movement sensor
(also known as accelerometer) is sensitive enough to work
from any part of the bed. Set the Interval and the Tone. Tap
the ON/OFF slider to activate.
– Name : allows you to use a specific name for the alarm. The
name will appear on the display when the alarm activates.
2. Tap Save to store the alarm details.
Turning Off an Alarm
 To stop an alarm when it sounds, touch and sweep the
icon to the right.
Setting the Snooze Feature
 To activate the Snooze feature after an alarm sounds,
touch and sweep the icon to the left. Snooze must
first be set in the alarm settings. For more information,
refer to “Alarm” on page 184.
Deleting Alarms
To delete an alarm, follow these steps:
1. From the Home screen, tap ➔
Clock ➔
Alarm ➔ ➔ Delete .
2. Tap the alarm or alarms you wish to delete. A green
check mark will appear next to each selection. Tap
Select all to delete all alarms.
3. Tap
Delete .
Z Z
Z
Z
DRAFT
FOR INTERNAL USE ONLY