User's Manual

DRAFT
FOR INTERNAL USE ONLY
5
Prepare Your DeviceGetting Started
Install the Battery
1. Insert the battery into the opening on the back of
the phone, making sure the connectors align.
2. Gently press down to secure the battery.
Replace the Back Cover
1. Place the battery cover onto the back of the
phone and press down.
2. Press along the edge of the back cover until you
have a secure seal.
Charge the Battery
Your device is powered by a rechargeable, standard
Li-Ion battery. A Wall/USB Charger (Charging Head
and USB cable) is included with the device, for
charging the battery.
The battery comes partially charged. You must fully
charge the battery before using your device for the
first time. A fully discharged battery requires up to 4
hours of charge time. After the first charge, you can
use the device while charging.
Warning: Use only Samsung-approved charging
devices and batteries. Samsung accessories are
designed to maximize battery life. Using other
accessories may invalidate your warranty and may
cause damage.
Your device comes with a charger (charging head
and USB cable) to charge your device from any
110/220 VAC outlet.
1. Insert the USB cable into the port.
2. Connect the USB cable to the charging head,
then plug the charging head into a standard
ACpower outlet.
3. When charging is complete, unplug the charging
head from the power outlet and remove the USB
cable from the device.
Caution Failure to unplug the wall charger before you
remove the battery, can cause damage to the device.