Installation Manual

Confidential
Chapter 2 Installing System
Samsung 5G Station Outdoor Installation Manual v1.0 26
Copyright © 2020, All Rights Reserved.
System Tilting & Swiveling
To tilt the system
1 Ensure that the items mentioned in below table are available.
The description and the images in this section are based on the CPE Outdoor
installed on a pole. However, you can also tilt and swivel the CPE Outdoor when it
is installed on a wall just as like you can with one installed on a pole.
Table 10. Tools for System Tilting
Category
Description
Recommended Torque Value M5 SEMS 25 lbfin (29 kgf·cm)
Working Tools
• Screw Driver Bit (+, No.2)
• Torque Driver (20–90 lbf·in)
• Screw Driver (+, No.2)
2 Turn the screws (used to adjust the angle) on both sides of the mounting
bracket assembly counter clockwise.
Figure 20. System Tilting (1)
3 Adjust the tilting angle by pulling the up and down tilt of CPE Outdoor.
o Up tilting: +6°/+12°/+15°
o Down tilting: -6°/-12°/-15°
M5 SEMS
[Left View] [Right View]