User's Manual

DRAFT
Internal Use Only
Changing Your Settings 271
Using a Signature to Unlock
This feature uses a recognized on-screen signature to unlock
the device.
1. From the main
Settings page, tap Device tab ➔ Lock
screen
.
2. Tap
Screen lock ➔ Signature .
3. Remove your S Pen.
4. From the Register Signature screen, draw a signature
or symbol within the drawing area.
5. Wait for the device to notify you that the signature was
registered and tap
Continue .
6. Repeat the process two more times to confirm the new
signature or pattern.
7. Enter a backup PIN and tap
Continue .
8. Repeat the process to re-confirm the PIN.
Setting an Unlock Pattern
Creating a screen unlock pattern increases security on the
phone. When you enable the User visible pattern field, you
will draw an unlock pattern on the screen whenever you
want to unlock the phone’s buttons or touch screen. When
you activate the User tactile feedback field, you feel vibration
as feedback while drawing the pattern.
The feature is now paired with a backup PIN code that acts
as a backup to the pattern lock. If you forget your pattern,
you can regain access to the device by entering a PIN code.
Note: Make sure the Require Pattern field is activated.
1. From the main
Settings page, tap Device tab ➔ Lock
screen
.
2. Tap
Screen lock ➔ Pattern .
3. Draw your pattern by touching your first on-screen
point. Then,
without removing your finger from the
screen, drag your finger over adjacent points until the
gray trace line overlaps each point
and they are
highlighted with a green circle.