User's Manual

DRAFT
Internal Use Only
Changing Your Settings 281
• Voicemail settings : displays the settings for the voicemail.
• Sound : assigns your device’s ringtone.
•Vibrate : configures the vibrate settings.
•TTY mode : allows you to configure the TTY settings. For more
information, refer to
“TTY Mode” on page 287.
• Hearing Aids : allows you to enable/disable hearing aid
compatibility. For more information, refer to
“HAC Mode” on
page 288.
Call rejection
1. From the main Call settings page, tap Call rejection ➔
Auto reject mode and tap one of the following options:
• All numbers : to reject all calls.
• Auto reject numbers : to reject all calls in your Reject list.
2. Tap Auto reject list .
3. Tap to manually add numbers to the Reject list.
4. Tap
Unknown to create a check mark and automatically
reject all calls that are not in your Contacts list.
Set reject messages
1. From the main Call settings page, tap Set up call
rejection messages
.
2. Tap to manually add a reject message.
– or –
Tap one of the pre-written messages to be displayed
when you want the call to be rejected. You can edit the
message if desired.
3. Tap
Save to save the reject message.
Answering/ending calls
1. From the main Call settings page, tap Answering/
ending calls
.
2. Select any of the following options:
• The home key answers calls allows you to press to
answer the phone.
• Voice control allows you to answer incoming voice calls using
voice.
• The power key ends calls allows you to press the power key
to end the current call.