User's Manual

Appendix
128
Using the cursor
On the assistive menu, tap Cursor . You can control the screen using small finger movements
on the touch area. Drag your finger on the touch area to move the cursor. Also, tap the screen
to select items under the cursor.
Use the following options:
•
/ : Select an item or scroll left or right on the screen.
•
/ : Scroll up or down the screen.
•
: Magnify the area where the cursor is located.
•
: Move the touch area to another location.
•
: Close the touch area.
To change the cursor settings, open the Apps screen, tap
Settings

Accessibility

Dexterity and interaction

Assistant menu . Then, customise settings in Touchpad and
cursor settings
.
Using enhanced assistive menus
Set the device to display enhanced assistive menus for selected apps.
On the Apps screen, tap
Settings

Accessibility

Dexterity and interaction

Assistant
menu

Assistant plus , tap the switch to activate it, and then select apps.
Turning on the screen with the air gesture feature
Use the air gesture feature to turn on the screen by moving your hand above the sensor at
the top of the device. You can turn on the screen without pressing a key. When you use this
feature, place the device on a flat surface with the screen facing upwards or hold the device
securely to prevent it from moving.
On the Apps screen, tap
Settings

Accessibility

Dexterity and interaction

Air wake
up
, and then tap the switch to activate it.
Setting tap and hold delay options
Set the recognition time for tapping and holding the screen.
On the Apps screen, tap
Settings

Accessibility

Dexterity and interaction

Tap and
hold delay
, and then select an option.
DRAFT, not FINAL
DRAFT