User's Manual

DRAFT
Internal Use Only
Changing Your Settings 231
•MAC address : view your device’s MAC address, required when
connecting to some secured networks (not configurable).
•IP address : view your device’s IP address.
Manage networks
Allows you to manage previous connected Access Points.
1. From the main
Settings page, tap Connections tab ➔ Wi-Fi .
2. Press and then tap
Manage networks .
3. Follow the on-screen prompts.
WPS Push Button
The WPS (Wi-Fi Protected Setup) feature (sometimes associated with
a physical or on-screen button on most WAPs) allows you to pair
your device and WAP without the need for entering a passcode. This
process is similar to Wi-Fi Direct pairing.
In this case, once the WPS feature is active on your WAP, your device
can then detect it and then immediately pair to it.
Note: WPS-capable routers appear in the Wi-Fi list of available
devices with the term ( WPS available ) below their name.
To pair your device using WPS:
1. Follow the WPS activation instructions specific to your Wireless
Access Point.
2. From the main
Settings page, tap Connections tab ➔ Wi-Fi .
3. Press then tap
WPS push button .
4. Once the connection is complete, confirm the external router
now appears in the Wi-Fi list as connected.