User's Manual
Table Of Contents
manufacturers of your electronic devices to solve any interference problems you
experience.
Important usage information
Use your tablet in the normal position
Avoid contact with your tablet’s internal antenna.
Allow only qualified personnel to service your tablet
Allowing unqualified personnel to service your tablet may result in damage to your
tablet and will void your warranty.
Ensure maximum battery and charger life
Avoid charging batteries for more than a week, as overcharging may shorten
battery life.
Over time, unused batteries will discharge and must be recharged before use.
Disconnect chargers from power sources when not in use.
Use batteries only for their intended purpose.
Handle SIM cards and memory cards with care
Do not remove a card while the tablet is transferring or accessing information,
as this could result in loss of data and/or damage to the card or tablet.
Protect cards from strong shocks, static electricity, and electrical noise from
other devices.
Frequent writing and erasing will shorten the life span of memory cards.
Do not touch gold-coloured contacts or terminals with your fingers or metal
objects. If dirty, wipe the card with a soft cloth.
Ensure access to emergency services
Emergency calls from your tablet may not be possible in some areas or
circumstances. Before travelling in remote or undeveloped areas, plan an alternate
method of contacting emergency services personnel.
Specific Absorption Rate (SAR) Certification Information
Your tablet conforms to European Union (EU) standards that limit human exposure
to radio frequency (RF) energy emitted by radio and telecommunications equipment.
These standards prevent the sale of tablets that exceed a maximum exposure level
(known as the Specific Absorption Rate, or SAR) of 2.0 watts per kilogram of body
tissue.
During testing, the maximum SAR recorded for this model was 0.869 watts per
kilogram. In normal use, the actual SAR is likely to be much lower, as the tablet has
been designed to emit only the RF energy necessary to transmit a signal to the
nearest base station. By automatically emitting lower levels when possible, your
tablet reduces your overall exposure to RF energy.
The Declaration of Conformity at the back of this manual demonstrates your tablets