User's Manual

Getting started
11
Connect the USB cable to the USB po
wer adaptor and then plug the end of the USB cable into
the multipurpose jack.
Connecting the charger impr
operly may cause serious damage to the device. Any
damage caused by misuse is not covered by the warranty.
•
The device can be used while it is charg
ing, but it may take longer to fully charge
the battery.
•
If the device rec
eives an unstable power supply while charging, the touch screen
may not function. If this happens, unplug the charger from the device.
•
W
hile char
g
ing
, the device may heat up. This is normal and should not affect the
device’s lifespan or performance. If the battery gets hotter than usual, the charger
may stop charging.
•
If the device is not charg
ing properly, take the device and the charger to a
Samsung Service Centre.
After fully charging, disconnect the device from the charger. First unplug the charger from the
device, and then unplug it from the electric socket.
T
o sa
v
e ener
gy, unplug the charger when not in use. The charger does not have a
power switch, so you must unplug the charger from the electric socket when not in
use to avoid wasting power. The charger should remain close to the electric socket
and easily accessible while charging.
DRAFT