User's Manual
109Editing with another VCR
VCR Additional Operations
filename[GB10ADDO-US.fm] model name1[SLV-D560P]
model name2 [SLV-D360P] [2-584-679-11 (1) US]
filename[C:\2584679111SLVD560PUS\GB10ADDO-US.fm]
Operation (when recording on this VCR)
To stop editing
Press the x (stop) buttons on both VCRs.
Tip
• To cut out unwanted scenes while editing, press X on this VCR when an unwanted scene
begins. When it ends, press X again to resume recording.
Before you start editing
• Turn on the VCR and the TV and set
it to the video channel.
• Press INPUT SELECT to display
“LINE 1” or “LINE 2” in the display
window.
• Press SP/EP to select the tape speed,
SP or EP.
1
Insert a source tape with its safety tab removed into the other (playback) VCR.
Search for the point to start playback and set it to playback pause.
2
Insert a tape into this (recording) VCR. Search for the point to start recording
and press X.
3
Press z REC on this VCR to set it to recording pause.
4
To start editing, press the X (pause) buttons on both VCRs at the same time.
z REC
X
x
GB03COV-US.book Page 109 Friday, November 12, 2004 6:03 PM