User's Manual

Menu Function
Channel Preset mode
7
4. Press STAR(‘*’) key to save and reboot the mobile.
There are three modes as following
• DS/HFK : Normal mode
• DS/DM : UART Qualcomm DM mode
• DS&DMUSB : USB Qualcomm DM mode
Channel Preset mode
1. Activate the ‘Engineer Menu’.(Refer to ‘Engineer
Menu’)
2. Press ‘3’ key to select ‘3. Test CDMA’.
3. Press ‘012’ to enter Channel input mode with key
pad.
4. Enter channel number with key pad.
5. Press STAR(‘*’) to save channel number.
6. After saving, press “002” to exit test mode
(Input ‘.’ between the command with pressing ‘#’
key)
• Channel number setting
00000 : PRL based or Standard system
2XXXX : 800 MHz CDMA, XXXX is CDMA channel
number.
3XXXX : 1.9 GHz CDMA, XXXX is PCS channel
number.
Making Markov Test Calls
1. Originate with a desired phone number to create
an outgoing call list.
2. Activate the ‘Engineer Menu’ (Refer to ‘Engineer
Menu’)
3. Press ‘2’ key to select ‘2. Field Service’.
4. Press ‘2’ key to Select ‘2. Test Calls’.
5. Use navigation keys(‘UP’/’DOWN’) to change the
selection with ‘Markov Call’.
6. Select ‘Markov Call’ with STAR‘*’ key, then MS will
originate the Markov call using the first entry in
outgoing call logs
(If the outgoing call list is empty, the MS will
originate to a default number, ‘1234567’.)
Using The Sounds Menu
1. Activate the ‘Engineer Menu’.(Refer to ‘Engineer
Menu’)
A120.book Page 7 Thursday, October 6, 2005 9:34 AM