User's Manual

6
•System Program
• Filed Service
•Test CDMA
•SIO Mode
• Sounds
•LCD Contrast
• Phone Info
•TTY Settings
Originating voice calls
1. Enter the number sequence with pressing number
keys.
2. To setup a voice call, just press ‘YES’ key for ‘Call?’
question.
NAM programming
Programming of all NAM parameters, e.g. NAM 1
Phone Number, Home SID, Service Sec.Code, MCC,
SVC OPT, Slot Cycle Index, etc.
1. Activate the ‘Engineer Menu’. (Refer to ‘Engineer
Menu’)
2. Press ‘1’ key to select ‘1. System Program’.
3. Press ‘2’ key to select ‘2. Edit’.
4. Use number keys to edit a parameter.
5. Press STAR(‘*’) key to save and go to next
parameter.
Field Debug Screen
1. Activate the ‘Engineer Menu’. (Refer to ‘Engineer
Menu’)
2. Press ‘2’ key to select ‘2. Field Service’
3. Press ‘1’ key to select ‘1. Debug Screen’
Repeat above sequence to exit Debug screen
(Debug Screen appears when a mobile stays in
‘Phonebook’ idle screen or in the conversation
state.)
Changing The DM/HANDSFREE Mode
1. Activate the ‘Engineer Menu’. (Refer to ‘Engineer
Menu’)
2. Press ‘4’ key to select ‘4. SIO Mode’
3. Use navigation keys(‘UP’/’DOWN’) to change the
selection.
A120.book Page 6 Thursday, October 6, 2005 9:34 AM