User's Manual

ManualsBrandsSamsung Electronics ManualsElectronicsTri-Mode Dual-Band Analog / PCS Phone (AMPS/CDMA)

GGeettttiinngg SSttaarrtteedd

Low Battery Indicator

You can easily tell if your battery needs to be

recharged by checking the Battery Status icon ( ) in

the upper-right corner of your phone’s display. The

presence of all three bars indicates a full charge, tw o

bars indicates a smaller charge, and one bar indicates

an even smaller charge. No bars (the battery icon is

empty) means your battery must be charged.

When the battery charge level gets low, the battery

sensor blinks an empty Battery Status icon ( ) and

sounds a w arning tone. If the battery level gets too

low, the phone will automatically turn off.

Unfortunately, if this happens, you’ll lose w hatever you

are doing and your phone call will cut off. Watch the

Battery Status icon and make sure your battery is

adequately charged.

4. When charging is finished (the light turns to green),

unplug the adaptor from the pow er outlet and from

the phone.

➀

➁

Switching the Phone On/Off

1. Press and hold dow n until the pow er-on image

is displayed to sw itch the phone on.

The service light on the phone flashes, and an alert

sounds. When the system locates services, the

greeting message displays along with the date and

time. You can now place and receive calls.

If the phone is out of service, the No Service icon

( ) appears on the display. In this case, you

cannot make and receive calls. You can try again

later w hen service is available.

Note: You can change the display language. To

change the language, use the Language menu

option (MENU 0-4); for further details, refer to

page 106.

2. When you wish to switch the phone off, hold dow n

more than tw o seconds.

WARNING!

Do not switch on the phone when mobile phone use

is prohibited or when it may cause interference or

danger.

Note: As with any other radio-transmitting device,

do not touch the antenna unnecessarily when

the phone is switched on. Contact with the

antenna affects the call quality and may cause

the phone to operate at a higher power level

than otherwise needed.