User's Manual

6. Select On or Off, and press <OK>.
Adjusting Key Beep
The keys on your phone beep when they are pressed. You can
adjust the volume of the beeps or turn them off when you do not
want the keys to beep at all.
1. From Standby mode, press <Menu> for the Main menu.
2. Select Settings
3. Select 2:Sounds.
4. Select 4. Key Tone.
5. Select Tone Level
6. Scroll to the desired key volume and press <OK> to select.
Setting Tone Length
The tone length setting enables you to select Normal or Long
DTMF (Dual-tone multi-frequency) tones. When you use a
teleservice, such as your bank account, and press the keys to
enter numbers into the teleservice, you are sending DTMF tones.
The system used by the bank or other service determines if you
need short or long DTMF tones. If the service is digital which
most are these days, normal DTMF will almost always work.
However, some new systems and almost older systems require
long DTMF tones.
To set the tone length:
1. From Standby mode, press <Menu> for the Main menu.
2. Select Settings.
3. Select 2:Sounds.
4. Select 5:Tone Length.
5. Select Long or Short, and press <OK>.
Web Settings
Setting User Address
Details Required!!!
Web Guard
The Web Guard requires you to take an extra step each time you
launch or exit the Browser. To change the Web Guard setting:
1. From Standby mode, press <Menu> for the Main menu.
2. Select Settings.
3. Select 3. PCS Vision and then 2:Net Guard.
4. Scroll to the desired option. The following options are
available:
.On
- to require an extra step when launching the
Browser.
. OFF - to require an extra step when exiting the Browser.
5. Press <OK> to save the selection.