User's Manual

Sprint PCS Service is unavailable, it searches for an
alternative system.
.
Analog:
This setting forces the phone to seek an analog
roaming system. The previous setting is restored the next
time the phone is turned on.
.
Sprint :
This setting allows y ou to select the Sprint PCS
Nationwide Network only and prevents roaming on other
networks.
5.
Press <OK> to
Save
.
Setting an Alert When Roam Charges Apply (Call Guard)
Inadditiontotheroamingicon, Call Guard alerts you when
roaming charges apply. This feature makes it easy to manage
your roaming charges by reminding you when you make or
receive roaming calls. It also requires you to take additional
steps before placing or answering a roaming call. These
additional steps are not required when you make or receive calls
while on the Sprint PCS Nationwide Network.
To turn the Call Guard feature on or off:
1.
Press <Menu> for the Main menu.
2.
Select
Settings
on Main menu.
3.
Press <8> for
Others
and then <7> for
Roaming
.
4.
Press <2> for
Call Guard
. Wait briefly until a message
prompt displays and then disappears from the display
screen.
5.
Select
Yes
or
No
, and press <OK>.
.
If the
Yes
option is chosen, an extra step is required to make
or take roaming calls.
.
If the
No
option i s chosen, no extra step is required to make
or take roaming calls.
To place the roaming calls with the Call Guard on:
1.
From Standby mode, dial 1+ area code + the seven-digit number.
(You can also initiate a call from the Internal Phone Book,
Call History or Sprint PCS Web Messages) and press <Talk>.
2.
A message is displayed indicating that roaming rate applies.
Press <1> to place the call.
To answer incoming roaming calls with the Call Guard on:
Remember if the Call Guard feature is set to
On
, you need to take
extra steps to make and receive roaming calls even if you have
selected the
Analog
setting.
To set the time and date in Analog mode:
The time and date are set automatically by the Sprint PCS
network. If you are outside your coverage area and are in analog
mode, the time and date are not automatically updated. To set
the time and date in analog mode, see "Set Time".