User's Manual

press <Back> to erase one digit at a time. Press and hold <Back> to
Return Standby mode)
3.
Press <Talk>. (To make calls when you are roaming, and Call
Guard is enabled, press <1> to acknowledge Roaming
rates. For further information see "To place the roaming calls
with the Call Guard on)
4.
When you're finished, press <End> or close the flip to
complete the call.
Tips:
To redial your last outgoing call, press <Talk> to view the phone number.
Press <Talk> again to dial.
When making calls off the Sprint PCS Network, always dial using
11 digits (1 + area code + phone number).
Four-Digit Dialing
Your phone has the ability to find and dial 4-digits of any phone
number stored in the Phonebook.
To call someone stored in your Phonebook by entering four
digits of their phone number:
1.
From Standby mode, enter four digits of any phone number
stored in the Phonebook.
2.
Press <Talk>.
Note:
If more than one number is found with the same last four digits, use
the navigation key to scroll up or down to the desired entry. When the
desired number is highlighted, press
.
Using One/Two/Three Speed Dialing
With this feature, you can automatically call the numbers stored
in your internal Phonebook using one key press for locations 1-
9, two key presses for locations 10-99, or three key presses for
locations 100-250.
To use
One-Touch Dialing
for t he Phonebook entries 1-9:
1.
Press and hold the appropriate key for two seconds. The
display confirms that the number has been dialed when it
shows “Connecting.”
To use
Two-Touch Dialing
for the Phonebook entries 10-99:
1.
Press the first digit.
2.
Press and hold the second digit for two seconds. The display
confirms that the number has been dialed when it shows
“Connecting.”
To use
Three-Touch Dialing
for the Phonebook entries 100-300:
1.
Press the first digit.
2.
Press the second digit.
3.
Press and hold the third digit for two seconds. The display
confirms that the number has been dialed when it shows
“Connecting”.