Manualshelf

User's Manual

ManualsBrandsSamsung Electronics ManualsElectronicsTri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA)
61626364656667686970
Changing the Sliding show
You can select the image to be displayed on the idle screen as Slide Show.
1.
From Standby mode, press <Menu> for the Main menu.
2.
Select
7:Setup
.
3.
Select
1:Display
and t hen
2:Slide Show.
4.
Select
In Camera
or
Saved to Phone
and choose 1~10 pictures
then press <OK> to pictures save to
Slide Show
.
Changing the Menu Style
You can select the menu style which displayed when you press <Left soft key>
to access the Main menu and select one of the options
available.
1.
From Standby mode, press < Left soft key > for the Main menu.
2.
Select
7:Setup
.
3.
Select
1:Display
and t hen
3:Menu Style
.
4.
Select the desired style by pressing the navigation key left or right.
5.
Press <OK> to save the selection.
Changing the Incoming Call
You can select the menu style which displayed when you press <Left soft key>
to access the Main menu and select one of the options
available.
1.
From Standby mode, press < Left soft key > for the Main menu.
2.
Select
7:Setup
.
3.
Select
1:Display
and t hen
4:Incomming call
.
4.
Select the desired style by pressing the navigation key left or
right to select With Caller ID or No Caller ID Incomming LCD display.
Changing the Greeting
The greeting can be up to 12 characters and is displayed on the
first line of your phone's display screen in Standby mode.
To change your greeting:
1.
From Standby mode, press <Left soft key> for the Main menu.
2.
Select
7:Setup
.
3.
Select
1:Display
and t hen
5:Greeting.
4.
You can use the user name as the greeting message or
customize the message.
If you select
Sprint PCS
, press <OK>, and then confirm by
selecting
Yes
, the name you have entered in the user address
field will be used as the greeting. The display
returns to the Display menu screen.
If you want to create a new greeting, select
Custom
and t hen
press <OK>
.
5.
If you have selected
Custom
, press <Back> for at least two
seconds to erase the existing greeting.
Type in the new greeting and then press <Left soft key> to save. For
further information for text entry, refer to "Entering