User's Manual

Selecting Ringer Types
Ringer types help y o u identify incoming c alls, messages, schedule events
and Roam ringer.
To select a ringer type for voice calls:
1.
From Standby mode, press <Left soft key> for the Main menu.
2.
Select
7:Setup
.
3.
Select
2:Sounds
.
4.
Select
2:Ringer Type
and t hen
1:Voice Calls
.
5.
Select either
With Caller ID
or
No Caller ID
, and press <OK>.
6.
Select the ringer category by pressing the navigation key left
or right. Then press the navigation key down to move to
Ringer
. Select the desired ringer type by pressing the
navigation key left or right.
7.
Listen to the available ringer types and press <OK> to select.
Tip:
If your ringer is set to
Vibrate
or
Off
, you can review the ringer types
but will not hear them.
To select a ringer type for messages:
1.
From Standby mode, press <Left soft key> for the Main menu.
2.
Select
7:Setup
.
3.
Select
2:Sounds
.
4.
Select
2:Ringer Type
and t hen
2:Messages
.
5.
Select
Voice Mail, Text Message,
or
Picture Mail
and press <OK>.
6.
Select the desired ringer category by pressing the navigation
key left or right. Then press the navigation key down to
move to
Ringer
. Select the desired ringer type by pressing the
navigation key left or right.
7.
Listen to the available ringer types and press <OK> to select.
To select a ringer type for schedule alarm:
1.
From Standby mode, press < Left soft key > for the Main menu.
2.
Select
7:Setup
.
3.
Select
2:Sounds
.
4.
Select
2:Ringer Type
and t hen
4:Schedule
.
5.
Select the desired ringer category by pressing the navigation
key left or right. Then press the navigation key down to
move to
Ringer
. Select the desired ringer type by pressing the
navigation key left or right. .
6.
Listen to the available ringer types, and press <OK> to select.
You can set the phone to use a distinctive ring for incoming
roaming calls.
1.
From Standby mode, press <Left soft key> for the Main menu.
2.
Select
7:Setup
.
3.
Select
2:Sounds
.
4.
Select
4:Roam Ringer
.
5.
Select
Normal
to use a normal ringer or
Distinctive
to use a
distinctive ringer.
6.
Press <OK> to save the selection.