User's Manual

Selecting Alerts
You can set the alerts ring type.
1.
From Standby mode, press <Left soft key> for the Main menu.
2.
Select
7:Setup
.
3.
Select
2:Sounds
.
4.
Select
3:Alerts
.
Your phone will beep at you from time to time to let you know
that certain things have happened. You can easily turn these
alerts off or on.
There are four types of the alert available:
.
Minute Beep
: You can set the minute beep options to sound
an alert 10 seconds before each elapsed minute to remind
you of the length of the current call.
.
Service Alert
: A service alert is two short beeps that sound
when the phone experiences a dropped call or failed call, or
the phone enters or leaves a service area.
.
Connect Tone
: You can set the phone to sound when your call
is connected to system.
.
Pow er On/Off
: You can turn on or off the power on/off sound that sounds
when the phone is powered on or off.
To turn each alert on or off:
1.
From Standby mode, press <Left soft key> for the Main menu.
2.
Select
7:Setup
.
3.
Select
2:Sounds
.
4.
Select
3:Alerts
.
5.
Scroll to the alert type you want to set:
Minute Beep
,
Service
,
Connect
, Signal Fade Tone Power On/Off or Flip Sound.
6.
Select
On
or
Off
, and press <OK>.
Selecting Key Tone
You can set the key t one type & level.
The keys on your phone beep when they are pressed. You can
adjust the volume of the beeps or turn them off when you do not
want the keys to beep at all.
1.
From Standby mode, press < Left soft key > for the Main menu.
2.
Select
7:Setup
.
3.
Select
2:Sounds
.
4.
Select
4:Key Tone
. And Select Tone Type or Tone Level.
5.
Scroll to the desired key volume or Tone Type then press <OK> to select.
Setting Tone Length
The tone length setting enables you to select Normal or Long
DTMF (Dual-tone multi-frequency) tones. When you use a
teleservice, such as your bank account, and press the keys to
enter numbers into the teleservice, you are sending DTMF tones.
The system used by the bank or other service determines if you