User's Manual

Setting Roaming
1.
From Standby mode, press < Left soft key > for the Main menu.
2.
Select
7:Setup
and t hen
8:Others
3.
Select
7:Roaming
.
4.
Press <OK> to display the set mode and call guard.
6.
If you select
Set mode
, a nd select using navigation keys
Automatic
,
Analog
,or
Sprint
.
7.
Press <OK> to save and exit.
8.
If you select
Call Guard
, and select using navigation keys
On or Off
.
9.
Press <OK> to save and exit.
Setting Location
(pls cfm!!!!)
With the Location menu, emergency calls allow rescue personnel
to find you when t hey otherwise might not know y our location,
provided that you are in a Sprint PCS Service area and the
service is available. This feature can also be turned off (except
during an emergency call) to e nsure your privacy. For a stronger
location signal, make sure the antenna is fully extended.
The settings allow you to turn the location feature on or off. If
the option is turned off, the Sprint PCS Network cannot locate
your position using the Location feature. This option is
automatically turned on when an emergency call is placed, then
turned back off when the call is completed.
To turn the Location feature on or off:
1.
From Standby mode, press <Left soft key> for the Main menu.
2.
Select
7:Setup
and t hen
8:Others
3.
Select
8:Location
.
4.
Read the Location disclaimer by using the navigation key .
5.
Press <OK> to display the Turn Location screen.
6.
Select
On
to turn the feature on or
Off
to turn it off.
7.
Press <OK> to save and exit.
Viewing Phone Information
1.
From Standby mode, press < Left soft key > for the Main menu.
2.
Select
7:Setup
and t hen
9:Phone Info
. You can see the phone's
information.