User's Manual

Call functions
22
5. Repeat steps 2 through 4 to add more pauses
and numbers, if necessary.
6. Press the OK key to store the number in your
Contacts as you normally would when storing a
number.
Pause dialing from a Contacts entry
1. Dial the number of the service from Contacts.
For further details about finding a number, see
page 61.
2. For a hard pause(s), wait for the appropriate
prompt from the number you are calling. When
prompted, press the SEND key to send the
DTMF (Dual tone multi-frequency) number that
follows the pause.
For a 2-second pause(s), your phone transmits
the number that follows the “T” pause two
seconds after the connection.
“Sending DTMF” flashes on the display and the
transmitted tone sounds.
3. Repeat from step 2, if necessary.
Voice dialing
Once you have stored a phone number in
Contacts, you can dial it simply by saying the
associated name or the number.
Before using the voice dial feature, you first need
to programme your phone to recognize your voice
and pronunciation in the
Adapt Digits menu
Call functions
23
Adjusting the volume during a call
During a call, if you want to adjust the earpiece
volume, use the Volume keys on the left side of
the phone.
The image on the display shows all 8 levels; the
more bars, the higher level.
In Standby mode, you can also adjust the keypad
tone volume using these keys.
Answering a call
When somebody calls you, the phone alerts you
by ringing and blinking the service light.
If the caller can be identified, the caller’s phone
number, or name if stored in your Contacts,
displays.
There are 2 ways to answer a call depending on
your setting in the
Call Answer menu
To end the call, close the phone or press the END
key.
If you select To answer the call,
TALK Key
press the TALK key.
Flip Open open the phone. If the
phone is already open,
press the SEND key.
Any Key press the Any key except
the END key.