User's Manual

DRAFT
FOR INTERNA L USE ONLY
Camera and Video 129
 Exposure value allows you to adjust the overall image brightness. Use the onscreen
slider to adjust the value. Choose from +2, +1, 0 (default), -1, or -2.
 Focus mode allows you to set this option to Auto focus, Macro, or Face detection.
Use Macro mode to take close-up pictures. Face detection causes the camera to
automatically recognize if there is a face in the shot. It then optimizes the focus and
exposure for the face. Use Auto focus for all others.
 Timer: allows you to set a timer for how long to wait before taking a picture. Options
include: Off, 2 sec, 5 sec, and 10 sec.
 Effects: allows you to change the color tone or apply special effects to the photo.
Options include: None, Negative, Black and white, and Sepia.
 Resolution: allows you to set the image size to: 8M (3264x2448), W6M
(3264x1836), 3.2M (2048x1536), W2.4M (2048x1152), W0.9M (1280x720), or 0.3M
(640x480).
 White balance: allows you to set this option to one of the following choices: Auto,
Daylight, Cloudy, Incandescent, or Fluorescent.
 ISO: ISO determines how sensitive the light meter is on your digital camera. Choose
from Auto, 100, 200, 400, or 800. Use a lower ISO number to make your camera
less sensitive to light, a higher ISO number to take photos with less light, or Auto to
let the camera automatically adjust the ISO for each of your shots
 Metering: allows you to set how the camera measures or meters the light source:
Center-weighted, Spot, or Matrix.
 Anti-Shake: reduces image blur due to the movement of the subject of the photo or
hand movement.
 Auto contrast: provides a clear image even under backlight circumstances where
intensity of illumination can vary excessively.
 Guidelines: allows you to turn the guidelines On or Off.
 Image quality: allows you to set the image quality to: Superfine, Fine, or Normal.
 GPS tag: allows you to turn GPS On or Off (also known as Geotagging). The
location of where the picture is taken is attached to the picture. (Only available in
Camera mode.)
 Storage: allows you to configure the default storage location for images or videos as
either Device or MicroSD card (if inserted).
 Reset: allows you to reset all camera or camcorder settings to the default values.