User's Manual

Mobile WiMAX Indoor RAS SPI-2210 System Description/Ed.07

Loading Message Flow

After performing the pre-loading procedure, if the method of loading is determined, the

Main OAM (ULM) of the MMA-S which performs the operation and the maintenance of

the entire indoor SPI-2210 performs loading by using the SFTP to the corresponding IS

(remote ID or its own storage). Then, the Main OAM (ULM) becomes the internal image

server for the lower board and performs the loading procedure. The information on the

software loaded in the indoor SPI-2210 can be checked in the upper management system.

The loading message flow is as the following figure:

Figure 4.19 Loading Message Flow

Indoor SPI-2210

MRA-S

MMA-S

Indoor SPI-2210

MRA-S

MMA-S

• • • •

WSM (RS/IS)

Registration

Image Loading

RS/IS

Registration

Image Loading

RS/IS

Non-volatile

Storage

Non-volatile

Storage