User's Manual

Mobile WiMAX Indoor RAS SPI-2210 System Description/Ed.07

5.2 Web-EMT

The Web-EMT is a type of GUI-based consol terminals and the tool to access the indoor

SPI-2210 directly, monitor the device status and perform operation and maintenance.

An operator can execute the Web-EMT only with Internet Explorer and the installation of

additional software is not necessary. In addition, GUI is provided in HTTPs protocol type

internally.

Figure 5.2 Web-EMT Interface

The Web-EMT enables the operator to restart the indoor SPI-2210 or internal boards,

inquire/set configuration and operation parameters, carry out status and failure monitoring

and perform the diagnosis function. However, the functions for resource grow/degrow or

the changes of the operation information concerned with neighbor list are only available on

the WSM managing the entire network and the loading image.

Indoor SPI-2210

MRA-S

Indoor SPI-2210

MRA-S• • • •

Web-EMT

MMA-S MMA-S

HTTP Server HTTP Server

HTTP message HTTP message

OAM command/response OAM command/response