User's Manual

Mobile WiMAX Indoor RAS SPI-2210 System Description/Ed.07

1.2 Characteristics of the Mobile WiMAX System

The major characteristics of Mobile WiMAX system are listed below.

High Compatibility and Cross-Interworking

The Mobile WiMAX system is based on IEEE 802.16 and complies with Wave 2 Profile

and ASN Profile C of the Mobile WiMAX Forum. Therefore, the Mobile WiMAX system

provides high compatibility and excellent cross-interworking.

High Performance Module Structure

The Mobile WiMAX system has high performance by using high-performance processor

and provides the module structure that it is easy to upgrade hardware and software.

High System Stability

The Mobile WiMAX system provides the redundancy structure for main modules to ensure

higher stability.

Variant Advance RF and Antenna Solution Support

The Mobile WiMAX system supports Multiple Input Multiple Output (MIMO) and applies

the power amplifier to support wideband operation bandwidth. In addition, it can readily

support 4-branch diversity and beamforming via upgrading software and additional

hardware.

Evolution Possibility into Next Generation Networking

The Mobile WiMAX system complies with the structure of the Mobile WiMAX ASN

Profile C network and the ASN Profile C network composition is similar to the network

structure considered in 3GPP Long Term Evolution (LTE)/Service Architecture Evolution

(SAE). Therefore, the Mobile WiMAX system can easily evolve into the next generation

network.

Maintenance Function with Strengthened Security

The Mobile WiMAX system provides the security function (SNMPv3, SSH, SFTP and

HTTPs) to all channels for operation and maintenance. And it provides the operator

Authentication, Authorization and Accounting (AAA) function to authenticate the operator

and assign the right for system access and stores the operation history in a log.