User's Manual

Mobile WiMAX Indoor RAS SPI-2210 System Description/Ed.07

System Log Control

The indoor SPI-2210 provides a log and log control function per application. An application

log can be created by an operator command or its debug level can be set. The operator can

usually keep the log function disabled, and when the log function is necessary, he can

change the debug level (Very Calm, Calm, Normal, Detail, Very Detail) to enable logging

and log save functions.

However, enabling log functions for many applications while the indoor SPI-2210 is

running may affect the system performance.

Disabling Zero Code Suppression (ZCS)

The indoor SPI-2210 collects statistics data and generates statistics files periodically.

The WSM collects these statistics files. A statistics file is composed of the header used to

indicate a statistics group and its detailed index (for example, a specific carrier, sector, CPU,

port, etc.) and the statistics data for that index.

In a statistics period, the statistics data for a specific index can become zero in a statistics

file in the following cases:

 When the index does not actually exist in the configuration.

 When the index exists in the configuration but its statistics data collected during that

period is zero.

Therefore, the Disabling ZCS function, which sets the zero data flag in the sub index

header, is provided to recognize the two cases separately.

Therefore, to distinguish the two cases above, the Disabling ZCS function is provided.

This function sets (1) or clears (0) the zero data flag in the index header.