User's Manual

CHAPTER 4. Message Flow

4-10

(Continued)

Classification Description

(9) The ACR receives the Path Registration Ack message and is notified of data

path set results.

(10) If an MS receives RNG-RSP, the MS transmits BW Request Header to notify the

system that the status is changed into the Awake Mode.

(11)~(12) If the Diameter protocol is used, as the MS has transited to Awake mode and a

new transport CID has been allocated, it sends a new accounting start message

to the AAA server to update the AAA server's accounting information. If the

RADIUS protocol is used, no accounting report is made when the MS has been

transited to Awake mode and the accounting information is updated at the

specified interim interval using the Accounting Request interim message.

Changing from Idle Mode to Awake Mode

For the procedure that the MS status is changed from Idle Mode to Awake Mode

due to paging, refer to ‘4.1.5’.