User's Manual

Mobile WiMAX RAS SPI-2213 System Description/Ed.00
© SAMSUNG Electronics Co., Ltd. VII
Figure 4.1 Initial Access Process............................................................................................ 4-2
Figure 4.2 Authentication Procedure (At the time of initial access) ........................................ 4-4
Figure 4.3 Authentication Procedure (At the time of the Authenticator Relocation) ................ 4-6
Figure 4.4 Awake Mode Æ Idle Mode Status Change Procedure .......................................... 4-7
Figure 4.5 Awake Mode Q Sleep Mode Status Change Procedure ....................................... 4-8
Figure 4.6 Idle Mode Æ Awake Mode (QCS) Procedure ........................................................ 4-9
Figure 4.7 Inter-RAS Location Update Procedure ................................................................ 4-10
Figure 4.8 Inter-ACR Location Update Procedure................................................................ 4-12
Figure 4.9 Paging Procedure................................................................................................ 4-14
Figure 4.10 Inter-RAS Handover Procedure......................................................................... 4-15
Figure 4.11 Inter-ASN Handover (ASN-Anchored Mobility) .................................................. 4-17
Figure 4.12 Inter-ASN Handover (CSN-Anchored Mobility).................................................. 4-18
Figure 4.13 Access Termination (Awake Mode) ................................................................... 4-19
Figure 4.14 Access Termination (Idle Mode) ........................................................................ 4-20
Figure 4.15 Network Synchronization Flow of SPI-2213 ...................................................... 4-21
Figure 4.16 Alarm Signal Flow of SPI-2213 ......................................................................... 4-22
Figure 4.17 Alarm and Control Structure of SPI-2213 .......................................................... 4-23
Figure 4.18 Loading Message Flow ..................................................................................... 4-25
Figure 4.19 Operation and Maintenance Signal Flow........................................................... 4-26
Figure 5.1 Web-EMT Interface ............................................................................................... 5-2