User's Manual

CHAPTER 2. System Overview
2-2
© SAMSUNG Electronics Co., Ltd.
Convenience of Installation and Work
The SPI-2L10 can be installed on a wall or pole, or in a rack, and it can be also installed in
an outdoor environment, allowing the operator to take appropriate and flexible action for
various installation environments.
Supporting MIMO and Use of a High Output Power Amplifier
The SPI-2L10 supports the MIMO of 2TX/2RX RF paths to obtain diversity gains and
Spatial Multiplexing (SM) effects, increasing the data transfer rate. In addition, it supports
a maximum output of 4 W per antenna path and a maximum output of 8 W per system.
High Integrated System
The SPI-2L10 has a highly integrated modular structure optimized for the 2Carrier/Omni
system. It also has a small system size and is lightweight.
Protection of Software
The SPI-2L10 protects software and its configuration information using non-volatile
memory within the system.
Providing or not the System Feature and Schedule to Provide the System
Feature
For the providing or not the system feature and schedule to provide the features
described in this system description, see separate document.