DIGITAL HOME CINEMA SYSTEM HT-DB390 THIS APPLIANCE IS MANUFACTURED BY: Instruction Manual TV DVD RECEIVER OPEN/CLOSE TV/VIDEO DIMMER DVD TUNER BAND AUX ASC SLOW MO/ST SUB TITLE SUPER5.
User's Manual Information Acknowledging Special Precautions and the FCC Industry Canada Notice Cautions Modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance Information This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received.
Safety Warnings CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CLASS 1 LASER PRODUCT This Compact Disc player is classified as a CLASS 1 LASER product.
Features The HT-DB350 combines the convenience of multi-disc playback capability, including DVD, VCD, CD, MP3-CD, CD-R, CD-RW, and DVD-RW, with a sophisticated AM/FM tuner, all in a single player. Built-in 5.1-Channel Amplifier The HT-DB350 comes with a built-in 5.1-channel amplifier, allowing you to enjoy dynamic sound. Super Digital Sound Master Equipped with a new digital audio technology (auto sound calibration, magic sound field, and magic headphone) developed in cooperation with DiMagic Co., Ltd.
Notes on Discs VIDEO surround sound and MPEG-2 video compression technology. Now you can enjoy these realistic effects in the home, as if you were in a movie theater or concert hall. PREPARATION DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital Disc Recording Format CD-R Discs • Depending on the disc recording device (CD-Recorder or PC ) and the condition of the disc, some CD-R discs 1 ~ 6 DVD players and the discs are coded by region.
Description Play/Pause ( Standby indicator Power ( Stop ( ) button ) button Open/Close button ) button Function button Auto Sound Calibration button Magic Sound Field button Magic Headphone button —Rear Panel— Video Output Connector Connect the TV's video input jacks (VIDEO IN) to the VIDEO OUT connector. VIDEO OUT SELECT SWITCH Use the switch to set video out External Digital Component Input Connector Use this to connect external equipment capable of digital output.
Description DVD POWER button TV/VIDEO, DIMMER button OPEN/CLOSE button Insert Remote Batteries TV DVD RECEIVER OPEN/CLOSE TV/VIDEO DIMMER MODE DVD TUNER BAND AUX ASC SLOW MO/ST SUB TITLE SUPER5.1 MUSIC Auto Sound Calibration button MOVIE PL II EFFECT 2 Insert two 1.5V AAA batteries, paying attention to the correct polarities (+ and –). 3 Replace the battery cover.
Connecting the Speakers Front Speaker (R) Front Speaker (L) Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Center Speaker Red White Green Wireless Transmission Antenna C SW CONNECTIONS L R Purple LS Wireless Rear Amplifier (SWA-1000) (With built-in wireless receiving antenna) RS Subwoofe Wireless Rear Speaker (L) Position of the DVD Player • Place it on a stand or cabinet shelf, or under the TV stand.
Connecting Wireless Rear Speakers Caution 1 Connect your pair of wireless rear speakers, (L) and (R), to the wireless rear amplifier. 2 Insert the power plug into an outlet, and then press the POWER button on the front panel. • Do not connect the wireless rear speakers • The Power Standby indicator will light up.
Connecting the FM and AM(MW/LW) Antennas If AM reception is poor, connect an outdoor AM antenna(not supplied). 1 2 Connecting the Video to TV 3 CONNECTIONS If FM reception is poor, connect an outdoor FM antenna (not supplied). AM Loop Antenna (supplied) ANTENNA FM Antenna (supplied) Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.
Connecting External Components Connecting an External Analog Component Example: Digital signal components such as a DVD or CD Recorder. Example: Analog signal components such as a VCR, Camcorder, and TV. CONNECTIONS Connecting an External Digital Component Audio Cable If the external analog component has only one Audio Out, connect either left or right. Optical Cable (not included) DIGITAL OUT L 1 2 R Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
Before Using Your DVD Player Your DVD player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.Depending on the disc you are using, these instructions may vary slightly. Read the instructions carefully before using. 1 Plug the power cord into the AC power supply. 2 TV 4 Press TV/VIDEO button to select VIDEO mode. 5 Selecting the Video Format Turn off the main unit and then press NTSC/PAL. • By default, the video format is set to "PAL".
Disc Playback Displaying Disc Information You can view playback information on the disc on the TV screen. Press INFO button. • Each time the button is pressed, the display changes as follows: Load a discs. DVD • Place a disc gently into the tray with the disc’s VCD CD MP3 JPEG label facing up. DVD RECEIVER Press OPEN/CLOSE button to close the disc tray.
Fast/Slow Playback Fast Playback Press and hold DVD VCD CD MP3 Skipping Scenes/Songs DVD VCD MP3 Briefly press . • Each time the button is held down during playback, the playback speed changes as follows: • • . Each time the button is pressed briefly during playback, the previous or next chapter, track, or directory (file) will be played. But, you cannot skip chapters consecutively.
Repeat Playback A-B Repeat Playback Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file). DVD VCD CD MP3 JPEG DVD Press REPEAT button. • Each time the button is pressed during playback, the repeat playback mode changes as follows: DVD MP3 JPEG Repeat Playback Options 1 VCD CD Press INFO button twice. 2 Press Cursor button to move to REPEAT PLAYBACK display. 4 Press ENTER button at the end of the segment.