SWPZ01-RX USER MANUAL 2008. 12.
SWPZ01-RX USER MANUAL Thank your purchasing this product This product is applied as following 2.4GHz IEEE 802.15.4 [ZIGBEE] This is ZIGBEE Radio Receiver module for Remote Control and in pair with Remote controller 1. Set up guide (1) Connect 10PIN CABLE as follow Figure 1-1) Figure 1-1) CABLE Connecting (2) Be built in TV MONITOR as follow Figure 1-2).
SWPZ01-RX USER MANUAL (3) Pairing with SWPZ01-TX RF Remote Controller.
SWPZ01-RX USER MANUAL ▣ Pin Descriptions Terminal NAME Inter face I/O Description 1 3.0V_in Power I/O DC 3.
SWPZ01-RX USER MANUAL FCC Compliance Information This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received including interference that may cause undesired operation. Warnings This equipment has been tested and found to comply with limits for a class B digital device, pursuant to Part 15 of the FCC Rules.
SWPZ01-RX USER MANUAL Caution Changes or modifications not expressly approved by the party responsible for compliance could void the us er’s authority to operate the equipment. Spec. Type of device: RF Receiver Frequency bands: 2405 MHz ~ 2480 MHz Channel space: 5 MHz Channel number: 16 Data rate: 250 kbps RF output power: 6.79 dBm (Peak) Size(with stand): 152 x 30.0 x 246 mm Weight: 165 g Input power: 3.0 Vdc Antenna type: Chip antenna (-0.
