SWPZ01-TX USER MANUAL 2008.
SWPZ01-TX USER MANUAL Thank your purchasing this product This product is applied as following 2.4GHz IEEE 802.15.4 [ZIGBEE] This is RF Remote Controller and in pair with ZIGBEE Radio Receiver module 1. Set up guide (1) Insert the battery (AAA) into the Remote Controller as follow Figure 1-1). Figure1-1) Battery Inserting (2) After pairing completed , you can use the Remote Controller as follow Figure 1-2).
SWPZ01-TX USER MANUAL (3) Pairing with SWPZ01-TX RF Remote Controller.
SWPZ01-TX USER MANUAL POWER TV ON/OFF 1. POWER: Turns the TV on and off. 2. TV : Selects the TV mode directly. 3. ON/OFF: Press to backlight the buttons on the remote. This function is convenient for using at night 1 2 3 4 5 6 7 8 9 - 0 PRE-CH CHLIST MENU FAV.CH or when the room is dark. 4. NUMBERIC Buttons: Press to change the channel. 5. Button: Press to select additional channels (digital and analog) being broadcast by the same station. 6. PRE-CH: Tunes to the previous channel. 7.
SWPZ01-TX USER MANUAL FCC Compliance Information This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received including interference that may cause undesired operation. Warnings This equipment has been tested and found to comply with limits for a class B digital device, pursuant to Part 15 of the FCC Rules.
SWPZ01-TX USER MANUAL Caution Changes or modifications not expressly approved by the party responsible for compliance could void the us er’s authority to operate the equipment. Spec. Type of device: RF Remote Controller Frequency bands: 2405 MHz ~ 2480 MHz Channel space: 5 MHz Channel number: 16 Data rate: 250 kbps RF output power: 6.61 dBm (Peak) Size(with stand): 152 x 30.0 x 246 mm Weight: 165 g Input power: 3.0 Vdc Antenna type: Chip antenna (-0.
