User's Manual

Wireless network 114
Using Auto Backup to send photos or videos
• If the PC supports the Wake on LAN (WOL) feature, you can turn on
the PC automatically by searching for the PC from your camera.
(p. 118)
• When you connect the camera to the WLAN, select the AP that is
connected to the PC.
• The camera will search for available access points even if you are
connecting to the same access point again.
• If you turn off the camera or remove the battery while sending files,
the file transfer will be interrupted.
• While you are using this feature, only [POWER] is available on your
camera.
• You can connect only one camera to the PC at a time for sending
files.
• The backup may be canceled due to network conditions.
• Photos or videos can be sent to a PC one time only. Files cannot be
sent again even if you reconnect your camera to another PC.
• When there are no files in the camera memory, you cannot use this
feature.
• You must turn off Windows Firewall and any other firewalls before
using this feature.
• You can send up to 1,000 files.
• On the PC software, the server name must be entered in the Latin
alphabet and can contain no more than 48 characters.