User's Manual

Wireless network 117
Sending photos using Wi-Fi Direct
When the camera connects via a WLAN to a device that supports the Wi-Fi Direct function, you can send photos to the device. This feature
may not be supported on some devices.
5
On the device, allow the camera to connect to the
device.
• The photo will be sent to the device.
• When there are no photos in the camera memory, you cannot use
this feature.
• If you cancel the connection attempt before it is complete, the
camera may not be able to reconnect to the device. In this case,
update your device with the latest firmware.
1
On the device, turn on the Wi-Fi Direct option.
2
On the camera, in Playback mode, scroll to a photo.
3
Press [ ], and then select Share(Wi-Fi) →
Wi-Fi Direct.
• When in the single image view, you can send only one photo
at a time.
• When in thumbnails view, you can select multiple photos by
scrolling to thumbnails, and then pressing [
]. Select
when you are finished selecting photos.
4
Select the device from the camera’s list of Wi-Fi Direct
devices.
• Ensure that the device's Wi-Fi Direct option is turned on.
• You can also select your camera from the device's list of Wi-Fi
Direct devices.