User's Manual

Wireless network 100
Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.
Icon Description
Ad hoc AP
Secured AP
WPS AP
Signal strength
Press [ ] to open AP setting options
• When you select a secured AP, a pop-up window appears.
Enter the required passwords to connect to the WLAN.
For
information about entering text, refer to "Entering text".
(p. 103)
• When a login page appears, refer to "Using the login browser".
(p. 101)
• When you select an unsecured AP, the camera will connect
to the WLAN.
• If you select a WPS profile supported AP, select WPS PIN,
and then enter a PIN on the AP device. You can also connect
to a WPS profile supported AP by selecting WPS PBC on the
camera, and then pushing the WPS button on the AP device.
Connecting to a WLAN
1
Rotate the mode dial to .
2
Select , , , , or .
3
Press [ ], and then select AP Setting.
• In some modes, press [ ] or follow the on-screen
instructions until the AP Setting screen appears.
• The camera automatically searches for available AP devices.
4
Select an AP.
AP Setting
Samsung 2
Samsung 1
Samsung 3
Samsung 4
Samsung 5
Back Select
• Select WPS PBC to connect to a WPS AP.
• Select Refresh to refresh connectable APs.
• Select Add wireless network to add an AP manually.