User's Manual

EN-12
English
EN
Using the DIRECT LINK button
You can turn on the Wi-Fi feature conveniently with [ ].
Setting a DIRECT LINK button option
1
On the Home screen, scroll to <Basic>.
2
Select → General → DIRECT LINK (Wi-Fi Button).
3
Select an option.
Using the NFC feature (Tag & Go)
1
Place the smart phone’s NFC antenna near the camera’s
NFC tag for more than 2 seconds.
2
Transfer les or launch a Wi-Fi function depending on the
current mode.
• Wi-Fi mode: MobileLink, Remote Viewnder
• Playback mode: Transfer a le immediately.
(Photo Beam), MobileLink
• Shooting mode: AutoShare, Remote Viewnder
- To set a Wi-Fi function to launch in Shooting mode,
scroll to <Basic> on the Home screen, and then select
→ General → Live view NFC → a Wi-Fi function.
Do not modify the tag information in any way.
Connecting to a WLAN
1
On the Home screen, scroll to <Wi-Fi>.
2
Select , , or .
3
Follow the on-screen instructions until the Wi-Fi Setting
screen appears.
• The camera automatically searches for available AP
devices.
• In some modes, press [
], and then select Wi-Fi
Setting.
4
Select an AP.
• When you select a secured AP, a pop-up window appears.
Enter the required passwords to connect to the WLAN.
• If you select a WPS prole supported AP, select
→ WPS
PIN connection, and then enter a PIN on the AP device.
You can also connect to a WPS prole supported AP by
selecting
→ WPS button connection on the camera,
and then pushing the WPS button on the AP device.