User Manual

CHAPTER 8. Security
© SAMSUNG Electronics Co., Ltd.
page 379 of 628
Parameter
Description
URL
URL to which the guest is redirected
7) To check the configuration, use the ‘show wlan security detail’ command.
WEC8500# show wlan security detail 1
[Captive Portal Configuration]
1) Go to configure  security  captive-portal configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# security
WEC8500/configure/security# captive-portal
WEC8500/configure/security/captive-portal#
2) To configure the web authentication method of web authentication in the captive
portal, execute the command as follows:
 web-auth web-type [FLAG]
 web-auth external-url [URL]
Parameter
Description
FLAG
Web Authentication Method
- internal: Uses the internal authentication page.
- external: Uses the authentication page of an external web
server.
- downloaded: Uses the authentication page downloaded
from the system.
- customized: Uses the authentication page created through
configuration.
URL
Address of an external authentication server
3) To configure the operation after authentication, execute the command as follows:
 web-auth after-auth [FLAG]
 web-auth redirect-url [URL]
Parameter
Description
FLAG
Operation after authentication
- redirect: Redirect to a specified URL
- request: Redirect to a requested URL
URL
URL specified as the operation after authentication