User's Manual

WIP-5001A Quick Installation Guide Connecting The WIP-5001A Wireless LAN Adaptor To Your Network
UniData Communication Systems Inc. Page 2 April 27, 2004
3. Connecting The WIP-5001A Wireless LAN Adaptor To Your
Network
1 Connect the PC and WIP-5001A with LAN cable. Connect LAN cable that is enclosed in WIP-
5001A box to PC LAN Port and connect the other side of LAN cable to WIP-5001A’s LAN
Port. There is a LAN Port that it said 10 Base-T at the backside of WIP-5001A.
2 Connects WIP-5001A with Power. There is a Power Port that said DC 5V at the backside of
WIP-5001A’s adapter. When WIP-5001A gets power, PWR and Link LED that are placed
frontside of WIP-5001A get turned on.
User must use WIP-5001A with the enclosed LAN cable in the box. If Link LED doesn’t get
turned on, check the PC LAN card and see if Link/Activity LED is turned on.
3 When you have completed the steps in this Quick Installation Guide, your connected network
should look similar to this.