Wireless audio Module Manual for 5GHz dual-band Wireless Audio module Samsung Copyright notice The information furnished herein by Samsung is proprietary and confidential and it shall not be duplicated, published or disclosed to any third party in whole or in part without the prior written consent of Samsung. Version Number Version No. 1.0 Date 2010.10.27 Revision History Revision No. Date Version 1.
Wireless audio Module 1. Introduction This features an embedded 8052 MCU, new low-power modes and support for the 5 GHz dual-band RF receivers. This supports up to 4 stereo audio streams and comes together with additional features such as: data encryption, pairing functionality, bi-directional control data messages, full autonomy for receivers, low-power audio snooze mode, WLAN detection and automatic frequency allocation.
Wireless audio Module 3. Operational Description Samsung wireless audio module is the 5GHz dual band RF Module that provide users of a wireless audio system to connect to TV. This uses 5GHz RF 2 channels. (5.2GHz band (5180, 5210, 5240 MHz), 5.8GHz band (5736, 5762, 5814MHz)) This enables a wide range of digital wireless audio applications. This wireless audio technology has been known for its extreme wireless fidelity and audio quality.
Wireleess audiio Moduule 5. Pin desccription 1.2 VDD : 5V powerr supply inpuut T # : it is useed to 5V pow wer supply input. i 6.RESET 7. I2C_SC CL_S : I2C serial clock connection. 8. I2C_SD DA_S: I2C data connecction. 12, 24. GR ROUND 13. BCK K 14. LRCK 15. DAT__W 16. DAT__X 6. Installatiion This modulee must be innstalled in a device and not n allow the user to repplace nor moodify it. And the location of insttallation is as a follows Fiigure 6-1. Figuure 6-1 The location l of in nstallation 7.
Wireless audio Module 8. Notice FCC Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Wireless audio Module 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for a population/uncontrolled environment can be satisfied. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment.
Wireless audio Module IC Statement This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada.
Wireless audio Module IC statement is required to be available in the users manual: This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following " Contains TX IC : 649E-WISP30 ".