User's Manual

viii
Declaration of Conformity
(European Countries)
Approvals and Certifications
The CE marking applied to this product
symbolizes Samsung Electronics Co., Ltd.
Declaration of Conformity with the following
applicable 93/68/EEC Directives of the
European Union as of the dates indicated:
January 1, 1995 : Council Directive 73/23/EEC
Approximation of the laws of the member states related to low
voltage equipment.
January 1, 1996 : Council Directive 89/336/EEC (92/31/
EEC), approximation of the laws of the Member States related
to electromagnetic compatibility.
March 9, 1999 : Council Directive 1999/5/EC on radio
equipment and telecommunications terminal equipment and
the mutual recognition of their conformity.
A full declaration, defining the relevant Directives and
referenced standards can be obtained from your Samsung
Electronics Co., Ltd. representative.
EC Certification
Certification to 1999/5/EC Radio Equipment &
Telecommunications Terminal Equipment Directive
(FAX)
This Samsung product has been self-certified by Samsung for
pan-European single terminal connection to the analogue public
switched telephone network (PSTN) in accordance with
Directive 1999/5/EC. The product has been designed to work
with the national PSTNs and compatible PBXs of the European
countries:
In the event of problems, you should contact the Euro QA Lab
of Samsung Electronics Co., Ltd. in the first instance.
The product has been tested against TBR21. To assist in the use
and application of terminal equipment which complies with this
standard, the European Telecommunication Standards Institute
(ETSI) has issued an advisory document (EG 201 121) which
contains notes and additional requirements to ensure network
compatibility of TBR21 terminals. The product has been
designed against, and is fully compliant with, all of the relevant
advisory notes contained in this document.
Replacing the Fitted Plug (for UK Only)
I MPORTANT
The mains lead for this machine is fitted with a standard (BS
1363) 13 amp plug and has a 13 amp fuse. When you change
or examine the fuse, you must re-fit the correct 13 amp fuse.
You then need to replace the fuse cover. If you have lost the
fuse cover, do not use the plug until you have another fuse
cover.
Please contact the people from you purchased the machine.
The 13 amp plug is the most widely used type in the UK and
should be suitable. However, some buildings (mainly old ones)
do not have normal 13 amp plug sockets. You need to buy a
suitable plug adaptor. Do not remove the moulded plug.
W ARNING
If you cut off the moulded plug, get rid of it straight
away.
You cannot rewire the plug and you may receive an
electric shock if you plug it into a socket.
I MPORTANT WARNING : You must earth this machine.
The wires in the mains lead have the following color code:
• Green and Yellow: Earth
•Blue: Neutral
•Brown: Live
If the wires in the mains lead do not match the colors marked
in your plug, do the following:
You must connect the green and yellow wire to the pin marked
by the letter “E” or by the safety ‘Earth symbol’ or colored green
and yellow or green.
You must connect the blue wire to the pin which is marked with
the letter “N” or colored black.
You must connect the brown wire to the pin which is marked
with the letter “L” or colored red.
You must have a 13 amp fuse in the plug, adaptor, or at the
distribution board.