Rev: 001 ISSUE NO : Product Family Data Sheet LM362A - CRI 90 Introduction Features Beam Angle: 120˚ Precondition : JEDEC Level 2a Dimension : 3.6 x 2.3 x 0.6 mm ESD withstand Voltage : up to ±5KV [HBM] Reliability Test : Refer to page 25 Applications INDOOR LIGHTING : Ambient Light, L-tube, Down light, LED bulbs and Ceiling Light SAMSUNG ELECTRONICS 95, Samsung2-Ro, Giheung-Gu, Yongin-City, Gyeonggi-Do 446-711, KOREA Copyright © 2009-2011 SAMSUNG ELECTRONICS Co.,Ltd.
Contents 1. Product Code Information ----------------------- 3 2. Luminous Flux Characteristics ----------------------- 6 3. Characteristics ----------------------- 7 4. Typical Characteristics Graph ----------------------- 8 5. Outline Drawing & Dimension ----------------------- 13 6. Reliability Test Items & Conditions ----------------------- 14 7. Solder Conditions ----------------------- 15 8. Tape & Reel ----------------------- 16 9. Label Structure ----------------------- 17 10.
1. Product Code Information 1) Luminous Flux Bins (Ts = 25℃) Sorting Condition lm @100mA Nominal CCT Product Code Flux Rank Flux Bin Intensity Range (cd) Flux Range (Φv, lm) 2700K 3000K SPMWHT325AD7YBW0S0 SPMWHT325AD7YBV0S0 S0 S0 S1 48.00 ~ 53.00 S2 53.00 ~ 58.00 S3 58.00 ~ 63.00 S1 50.00 ~ 55.00 S2 55.00 ~ 60.00 S3 60.00 ~ 65.
2) Chromaticity Region & Coordinates http://www.samsungled.
2) Chromaticity Region & Coordinates (Continued) Region CIE X CIE Y Region CIE X CIE Y Region CIE X CIE Y Region CIE X CIE Y W rank (2700K) V rank (3000K) 0.4373 0.3893 W1 W2 W3 W4 W5 W6 W7 W8 0.4418 0.3981 0.4475 0.3994 0.4465 0.4071 W9 0.4513 0.4164 0.4573 0.4178 0.4147 0.3814 V1 0.4183 0.3898 0.4242 0.3919 0.4221 0.3984 V9 0.4259 0.4073 0.4322 0.4096 0.4428 0.3906 0.4523 0.4085 0.4203 0.3833 0.4281 0.4006 0.4428 0.3906 0.4523 0.4085 0.4203 0.3833 0.4281 0.4006 0.4475 0.3994 0.
2. Luminous Flux Characteristics (Ts = 25℃) Nominal Minimum CCT CRI1) 2700K 3000K If(mA) Vf(V) Power(W) Flux(lm) lm/W 50 5.71 0.29 32 109 100 5.96 0.60 58 96 110 5.99 0.66 62 94 120 6.03 0.72 67 93 130 6.06 0.79 71 90 140 6.09 0.85 75 86 150 6.11 0.92 79 85 160 6.14 0.98 83 83 170 6.17 1.05 87 81 180 6.20 1.12 91 80 190 6.23 1.18 94 80 200 6.27 1.25 98 78 50 5.71 0.29 33 112 100 5.96 0.60 59 99 110 5.99 0.66 64 97 120 6.
3.
4. Typical Characteristics Graph 1) Spectrum Distribution (Ts = 25℃) 2700K & 3000K http://www.samsungled.
2) Forward Current Characteristics (Ts = 25℃) Relative Flux vs. Forward Current Forward Current vs. Forward Voltage http://www.samsungled.
3) Temperature Characteristics Relative Flux vs. Ts(solder temp.) @ 100mA Forward Voltage vs. Ts(solder temp.) @ 100mA http://www.samsungled.
4) Color shift Characteristics Color x,y vs. Forward Current http://www.samsungled.
5) Derating Curve (Ta = 25℃) Rj-a = 30℃/W Rj-a = 21℃/W Rj-a = 12℃/W 6) Viewing Angle Characteristics Viewing Angle http://www.samsungled.
5. Outline Drawing and Dimension 1. Tolerance is ±0.1 mm 2. The maximum compressing force is 15N on the silicone ⓐ 3. Do not place pressure on the encapsulation resin ⓑ Recommended Land Pattern Notes: 1) This LED has built-in ESD protection device(s) connected in parallel to LED Chip(s). 2) Ts point & measurement method ① Measure the nearest point to the thermal pad as shown above. If necessary, remove PSR of PCB to reach Ts point. ② Thermal pad must be soldered to the PCB to dissipate heat properly.
6.
7. Solder Conditions 1) Reflow Conditions ( Pb Free ) Reflow Frequency : 2 times max. 2) For Manual Soldering Not more than 5 seconds @Max. 300℃, under soldering iron. http://www.samsungled.
8. Tape And Reel Start End More than 40 ㎜ Mounted with More than (100~200)㎜ Leading part more than Unloaded tape Flash LED Unloaded tape (200~400)㎜ (1) Quantity : The quantity/reel to be 4,000 pcs. (2) Cumulative Tolerance : Cumulative tolerance/10 pitches to be ±0.2 ㎜ (3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at 10° angle to be the carrier tape. (4) Packaging : P/N, Manufacturing data code no.
9.
10.
2) Aluminum Packing Bag A1W1S1 SPMWHT325AD7YBW0S0 A1W1S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAW94001 / I001 / 4,000 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII Silica gel & Humidity Indicator Card in Aluminum Vinyl Bag http://www.samsungled.
11. Precaution for use 1) For over-current-proof function, customers are recommended to apply resistors to prevent sudden change of the current caused by slight shift of the voltage. 과전류 방지를 위해 전압의 미세한 이동에 의해 야기되는 전류의 순간 변화를 방지하기 위해 저항 등의 설치를 권장함. 2) This device should not be used in any type of fluid such as water, oil, organic solvent, etc. When washing is required, IPA is recommended to use. 제품은 물, 오일, 유기물과 같은 액체 타입에서의 사용은 제한되며, 세정이 필요할 시에는 IPA 사용을 권장함.
7) Devices require baking before mounting, if humidity card reading is >60% at 23±5℃. 만약 습도표시카드의 수치가 23±5℃에서 60% 이상이라면, 제품 실장 전 baking해야 함. 8) Devices must be baked for 1 hour at 60±5℃, if baking is required. 만약 baking이 필요하다면, 제품은 60±5℃에서 1시간 정도 baking 되어야 함. 9) The LEDs are sensitive to the static electricity and surge. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. LED는 정전기 및 서지에 민감한 제품이므로, LED 제품을 다룰 시에는 정전기 방지장갑이나 손목밴드를 사용하기를 권장함.
11) Risk of Sulfurization (or Tarnishing) The LED from Samsung Electronics uses a silver-plated lead frame and its surface color may change to black(or dark colored) when it is exposed to sulfur(S), chlorine (Cl) or other halogen compound. 삼성전자의 LED는 Ag(은)을 도금한 리드프레임을 사용함. 이 리드프레임의 표면이 황(S), 염소(Cl), 또는 다른 할로겐 화합물들에 노출시 Ag(은)은 검정(또는 어두운색)으로 바뀔 수 있음. Sulfurization of lead frame may cause intensity degradation, change of chromaticity coordinates and, in extreme cases, open circuit. It requires caution.
12. Hazard Substance Analysis Report http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
Revision History Date No. Revision History 2013.12.05 001 New version http://www.samsungled.com Writer Drawn Approved N.R.KIM S.B.
